GC G-Cem Linkace-Translucent
₹6,335.00₹7,350.00 (-14%)
Modal – G-Cem Linkace-Translucent
G-CEM LinkAce, the next generation self-adhesive resin cement from GC, builds on this expertise with new high technology including an innovative initiator system for fast and safe polymerization. The result is a material that offers exceptional physical properties and bond strength while keeping the same ease-of-use and lack of post-operative sensitivity seen with G-CEM Automix.
| Component | % |
| Fluoro-alumino-silicate glass | 60-70 |
| Urethanedimethacrylate | 12-17 |
| Dimethacrylate | 12-17 |
| Silicon dioxide | 3-8 |
| Initiator | Trace |
| Inhibitor | Trace |
| Pigment | Trace |
Indications
- Cementation of all types of all ceramic, resin and metal-based inlays, onlays, crowns and bridges.
- Cementation of metal, ceramic, fibre posts, and cast post and cores.
ADVANTAGES
- offers unsurpassed wear resistance due to its small and homogeneously distributed filler particles.
- provides for exceptionally reliable self-curing under all materials.
- contains unique phosphate monomers that chemically bond to Zirconia, for a strong and stable bond.
The working time is 3 minutes 30 seconds from start of mix at 23°C (73.4°F).
Setting time: 4 minutes after removing excess material
Halogen/LED, intensity for ceramic, indirect composites and metal-based restorations: 700mW/cm2, covering wavelength: 430 to 480 nm)
(Halogen/LED, intensity for fiber post, metal ceramic, cast post and core: 700mW/cm2, covering wavelength: 430 to 480 nm). b) Let the material set for another 4 minutes.
In case of a cast post and core, let the material set for 10 minutes.
CONTRAINDICATIONS
1. Pulp capping.
2. In rare cases the product may cause sensitivity in some people. If any such reactions are experienced, discontinue the use of the product and refer to a physician.
3. This product is not indicated for filling or core build-up.
STORAGE
Store at room temperature away from heat, moisture and direct sunlight (4-25°C) (39.2-77.0°F).
Shelf life: 2 years from date of manufacture
CAUTION
1. In case of contact with oral tissue or skin, remove immediately with a sponge or cotton soaked in alcohol. Flush with water. To avoid contact, a rubber dam and/or cocoa butter can be used to isolate the operation field from the skin or oral tissue.
2. In case of contact with eyes, flush immediately with water and seek medical attention.
3. Do not use G-CEM in combination with eugenol containing materials as eugenol may hinder G-CEM from setting or bonding properly.
4. Use a protective light shield or similar protective eye wear during light curing.
5. This product is not indicated for filling or core build-up.
- 2 x G-CEM LinkAce Syringes (4.6gm, 2.7ml each
- 15 x Automix Tip Regular
- 5 x Automix Tips for endo (with 5x Extension Tips)
