Pulpdent Root Canal Sealer Kit

Ingredients :-

• Powder contains zinc oxide, zinc stearate, calcium phosphate and barium sulfate
• Liquid contains eugenol and Canada balsam

For All Permanent Filling Techniques :-

• Pressure Syringe Technique
• In conjunction with solid core
• Paste Filler/Lentulo
• Lateral condensation

Indicated for primary and permanent teeth :-

• A thick mix eliminates free eugeno and ensures patient comfort
• Can be drilled for a post
• Can be removed with mechanical and hand instrumentation, if necessary

Features :-

• Does not shrink upon setting
• Resorbs with roots of deciduous teeth
• Flows through 30-gauge needles
• Tissue compatible
• Slight overfills often resorb over time

• Root Canal Sealer Kit: 15cc powder, 7.5mL liquid, mixing pad, scoop

INSTRUCTIONS FOR USE WITH LENTULO TECHNIQUE

Mix 2 scoops powder with 4 drops liquid, or multiples thereof, and place in canal using a lentulo paste filler.

INSTRUCTIONS FOR USE WITH PULPDENT PRESSURE TECHNIQUE :-

1. Using good endodontic procedures, take a diagnostic x-ray with a radiopaque stop to determine the root length.

2. Open the canal to a size 35 or larger file to a distance 1-2 mm from the apex. Taper the canal walls to a funnel shape. Prepare the apical 1 – 2 mm with parallel walls.

For completely formed teeth, it is best not to open the apex beyond a size 20-30 file.

3. Select a Pulpdent Pressure Syringe needle, place a radiopaque stop on it, and place the needle in the canal so that it wedges within 1-2 mm from the apex. A 30-gauge needle can be used if the apical 1–2 mm has not been opened beyond a size 20 file. Place the needle with a radiopaque stop back into the color plastic sheath.

4. Invert powder bottle to fluff powder. Maintaining a 1:1 ratio, dispense a minimum of 3 scoops of powder and 3 drops of liquid onto a mixing pad. For accurate measurement, level the scoop of powder with a spatula, but do not pack the powder.

5. Using a metal spatula, mix sealer to a creamy, putty-like consistency. The sealer should be pliable enough to form a homogeneous mass.

6. Remove the white cap from the Pressure Syringe needle and completely fill the hub of the needle with the thick mix of Pulpdent Root Canal Sealer. This can be easily  done by using a spatula or plastic instrument or by placing the needle hub over the sealer and pressing it against the mixing pad. Pack tightly to eliminate air pockets.PULPDENT ® Root Canal Sealer Directions For Use

7. Make sure the Pressure Syringe barrel and screw plunger are separated. Thread the needle onto the Pressure Syringe barrel and hand tighten. To place additional sealer in the Pressure Syringe, unscrew the needle, fill the hub again, and place it back on the Pressure Syringe.

8. Slip the handle onto the barrel so that it bends away from the patient’s mouth, and insert the screw plunger into the barrel.

9. Remove the color plastic sheath from the Pressure Syringe needle. Slowly turn the screw plunger clockwise until sealer begins to extrude at the end of the needle.

10. Place the needle into the root canal 1-2 mm from the apex. It should wedge in the apical portion of the canal. The needle can be bent for easy access, but do not crimp the needle.

11. The screw plunger knob has four lines 90° apart indicating one-quarter turn. Turn the screw plunger one- quarter turn clockwise and wait 5 seconds. This fills the 1–2  mm at the apex. A radiograph can be taken at this time to check for a proper apical seal.

12. Before filling the remaining root canal space, withdraw the needle slightly to break contact with the canal walls. This ensures that additional sealer will not be forced through the apex.

13. Continue to turn the screw plunger slowly until sealer flows into the access cavity.

14. Using a cotton plier, hold a cotton pellet in the access cavity against the side of the needle, and slowly withdraw the needle while continuing to turn the screw plunger. This will fill the space previously occupied by the needle. Use an instrument to force the cotton pellet into the canal to condense the sealer.

15. Remove and discard the needle. Empty the Pressure Syringe by turning the screw plunger clockwise as far as it can go.

16. Immediately after use, separate the screw plunger from the barrel by turning it counterclockwise. Use Wonder Orange Cleaning Solution to clean the screw plunger and barrel. A pipe cleaner can be used to help clean the inside of the barrel. When the Pressure Syringe is clean, the screw plunger should spin freely in the barrel.The Pressure Syringe can be autoclaved.