-
Itena DentoCore Body Core Build Up Material
- Dual (self- and light-curing).
- Polymerization guaranteed, even in the areas which are unreachable with the LED curing unit light.
- Rubbery phase allows for removal of excess material.
- Nanoparticle technology.
- Enhanced mechanical properties of conventional.
Rs69.00Rs110.00Itena DentoCore Body Core Build Up Material
Rs69.00Rs110.00 -
Maarc Pattern Wax
- The basic classification from our side is being done based on hardness and stiffness and flow of waxes.
- Softer waxes with high flow are more flexible and are often used
- Flexible
- Fit perfectly in cervical areas
- High adaptation
- Stability to surfaces
Rs299.00Rs350.00Maarc Pattern Wax
Rs299.00Rs350.00 -
Maarc Die Spacer Separator
- Increases film formation and wetting on the mold surface at the very high temperatures produced during the die casting process
- Excess of die lubricant fails to evaporate, leading to porosity inside the casting and poor surface finishing of the part.
Rs350.00 – Rs690.00Maarc Die Spacer Separator
Rs350.00 – Rs690.00 -
Maarc Die Hardner
- It produces a homogenous coating on the die stone and plaster attributed to its viscosity.
- It seals, hardens and water proofs stone and plaster.
- It protects models against abrasion specifically at marginal area which is most prone to breakage.
- The film does not disassociate from the die while building wax pattern due to heating.
- It is rapid setting and thereby reduces working time.
Rs375.00Rs420.00Maarc Die Hardner
Rs375.00Rs420.00 -
-
Maarc Sealmax-R Resin Based Root Canal Sealer
- Permanent obturation of root canals of teeth of the secondary dentition with or without the aid of obturation points.
- Eugenol Free
- Insoluble in water and non degradable
- Minimum shrinkage at room temperature
Rs799.00Rs1,000.00Maarc Sealmax-R Resin Based Root Canal Sealer
Rs799.00Rs1,000.00 -
Rs1,599.00
Rs2,299.00Itena Prevent Seal Pit & Fissure Sealant
Rs1,599.00Rs2,299.00 -
Maarc Ni-Cr Alloy White Metal
- It is beryllium free alloy with excellent castability.
- It is reusable with addition of appx 50% fresh metal during recasting.
- It can be cast in open flame.
- It has got good burnish ability and is easy to finish.
- It can be used for making cast crown bridge and pontics and frames for hard resin crowns.
Rs2,499.00Rs3,200.00Maarc Ni-Cr Alloy White Metal
Rs2,499.00Rs3,200.00 -
Rs2,849.00
Rs4,990.00Itena Dentotemp Long Term Temporary Cement
Rs2,849.00Rs4,990.00 -
Itena Dentocore Core Build Up And Post Cementation Composite Material
- Dual (self- and light-curing) Polymerization guaranteed, even in the areas which are unreachable with the LED curing unit light.
- Rubbery phase allows for removal of excess material
- Enhanced mechanical properties of conventional Bis-GMA composite
- Low polymerization shrinkage Better marginal adaptation
- Excellent compressive strength for long lasting restorations
- Fluoride release Strengthens natural tooth structure and helps to prevent secondary tooth decay
- Radiopaque
Rs2,899.00Rs3,200.00Itena Dentocore Core Build Up And Post Cementation Composite Material
Rs2,899.00Rs3,200.00 -
Rs2,899.00
Rs3,400.00Itena Totalcem Self Etching And Self Adhesive Permanent Resin Luting Cement
Rs2,899.00Rs3,400.00 -
Rs2,999.00
Rs3,099.00Itena Perfect Polish Diamond Polishers
Rs2,999.00Rs3,099.00
Shop By Department
